Tanda-tanda kerusakan Printer

Error code Canon IP1300, IP1700, IP1200, IP1880, IP1980

Posted by: G&G Printer

* In: Canon
* Comment!

3x orange 1x hijau = mekanik error
4x orange 1x hijau = absorber full /direset dengan general tools
5x orange 1x hijau = cartirdge black/colour bermasalah
7x orange 1x hijau = cartirdge black/colour bermasalah
8x orange 1x hijau = absorber full / direset dengan general tools
12x / 15x orange 1x hijau = cartridge detection


Error Code for Canon MP160

Posted by: G&G Printer

* In: Canon
* Comment!

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
Tags: canon MP160, error code

Comments are closed.

Service Manual Canon iP3000

Posted by: G&G Printer

* In: Canon Resetter
* Comment!

The printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The LED lights in green to indicate that a function is selectable.)

Holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)

Holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)

The LED lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)

The function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.
Tags: Canon Pixma iP3000, Canon Resetter
5 Responses to "Service Manual Canon iP3000"